Problem with D110PG noise for caller

hello:
If you use D110PG, please make sure the driver have been patched. if done that, please post the IRQs and logs.
regards!
James.zhu

the driver was patched with yours driver.
What log you want?>
irq
00:00.0 0600: 8086:2778
00:01.0 0604: 8086:2779
00:1c.0 0604: 8086:27d0 (rev 01)
00:1c.4 0604: 8086:27e0 (rev 01)
00:1c.5 0604: 8086:27e2 (rev 01)
00:1d.0 0c03: 8086:27c8 (rev 01)
00:1d.1 0c03: 8086:27c9 (rev 01)
00:1d.2 0c03: 8086:27ca (rev 01)
00:1d.3 0c03: 8086:27cb (rev 01)
00:1d.7 0c03: 8086:27cc (rev 01)
00:1e.0 0604: 8086:244e (rev e1)
00:1f.0 0601: 8086:27b8 (rev 01)
00:1f.1 0101: 8086:27df (rev 01)
00:1f.2 0101: 8086:27c0 (rev 01)
00:1f.3 0c05: 8086:27da (rev 01)
04:00.0 0200: 14e4:167a (rev 02)
05:04.0 0280: e159:0001
05:07.0 0300: 1002:515e (rev 02)



pbx-union:/proc/irq# lspci
00:00.0 Host bridge: Intel Corporation E7230/3000/3010 Memory Controller Hub
00:01.0 PCI bridge: Intel Corporation E7230/3000/3010 PCI Express Root Port
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5 (rev 01)
00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 6 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
04:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5754 Gigabit Ethernet PCI Express (rev 02)
05:04.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface
05:07.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02)

hello:
please show me the result of cat /proc/interrupts。
regards!
james.zhu

CPU0 CPU1
0: 88 0 IO-APIC-edge timer
1: 2 0 IO-APIC-edge i8042
8: 34 0 IO-APIC-edge rtc0
9: 0 0 IO-APIC-fasteoi acpi
12: 4 0 IO-APIC-edge i8042
14: 69 0 IO-APIC-edge ide0
16: 78540636 0 IO-APIC-fasteoi wcte11xp
18: 0 0 IO-APIC-fasteoi uhci_hcd:usb3
20: 14862 0 IO-APIC-fasteoi ata_piix
21: 2 0 IO-APIC-fasteoi uhci_hcd:usb1, ehci_hcd:usb5
22: 0 0 IO-APIC-fasteoi uhci_hcd:usb2
23: 2653 0 IO-APIC-fasteoi uhci_hcd:usb4
219: 2 0 PCI-MSI-edge eth0
NMI: 0 0 Non-maskable interrupts
LOC: 831437 453121 Local timer interrupts
RES: 584 633 Rescheduling interrupts
CAL: 86 172 function call interrupts
TLB: 190 456 TLB shootdowns
TRM: 0 0 Thermal event interrupts
SPU: 0 0 Spurious interrupts
ERR: 0
MIS: 0
Linux pbx-union 2.6.26-1-686 #1 SMP Thu Aug 28 12:00:54 UTC 2008 i686 GNU/Linux

pls send ssh account to This email address is being protected from spambots. You need JavaScript enabled to view it.

You need that Asterisk server is connected to T1/Vox line? I cant connect asterisk to line T1/Vox becasue I am using this line with us old PBX.

I can give you a ssh account to this server but it doesnt have conection to line T1 (PTSN)
It works 4U?

I put the card in other machine and it works fine.